Guide: Samsung Tocco Firmware Flash – part 1

Boot: Hold down the “Volume -” button on the left side, and the “Camera” button on the right, then press the “Power” button = all three buttons need to be pressed together. Your phone should start up into a red\blue on black bootloader screen. Samsung Tocco

Open multiloader.exe, select the second row (MSM6275/MSM6280(Z*8yada, yada,yada,etc, etc, f480)) & configure to look like my screenshot below by pressing the Boot button on the left side and browse to the bootfiles folder. Then select the other buttons down the left side! amss_compressed, Rsrc1,Rsrc2 [<-use the *F480(Low)* file] and FactoryFS as shown.
http://www.zshare.net/image/543416278a82061b/

Read more »

General Info: Flashing your Samsung Tocco will delete all personal files, contacts, messages & info saved to the phone memory, & all settings will revert to factory defaults! Everything you wish to restore should be backed up, either to memory card or via Samsung PC Studio (not needed for flashing) before you begin the process & then remove the memory card from the phone.
The Firmware supplied in the link below is an original open (all networks) European Samsung copy that I have found to be reliable and better than the vodafone branded version my handset came with, Network setting were (in my case at least) retrieved from the sim card once it was replaced in the phone. You can check your current firmware version by typing *#1234# in the dialing screen – make a note of it, just in case you wish to find a copy for restoration later.

Samsung Tocco phone pictures -Samsung Cell Phone photos

Read more »